MGH Engineering & Control (Pvt.) Ltd.

English		Japan
Call Us: +92 423 5314521-2
Email: info@mgheng.com

Safety is no accident. With over 60 years of field experience and a team of in-house engineers, application specialists, and combustion researchers, you can rely on MGH for effective, reliable explosion protection solutions that fit your growing safety needs. We stand behind our explosion protection products with a commitment to quality, full-scale explosion testing capabilities and unprecedented expertise.

MGH is a leader in the development of effective, cost-efficient, ATEX- certified explosion venting solutions. Explosion venting, one of the most common and effective forms of passive explosion protection, provides overpressure protection from potential industrial explosion hazards by providing a planned pathway for the expanding gases to escape. Damage to industrial equipment subjected to explosions can be controlled through use of MGH's virtually maintenance free explosion vents.

Brochure

Venting Guide

Stock Vent Selection Guide

Square/Rect. Bulged

Square/Rect. Flat

Round Bulged

Round Flat

Performance Attributes

Operating Ratio

Operating
Temp Range

Vacuum
Rating

Non-
Fragmenting

Pulsating/
Cycling

Sanitary

MGH Model	Design	Burst Pressure Range							Compliance
Vmax	Single Element	1.5 - 5 PSIG 103 - 345 MBARG 0.1 - 0.35 KG/CM2	80%	0 - 350°F. 0 - 175°C	Partial	•	Best		NFPA 68
Sani-V-S	Single Element Integrated Frame	0.7 - 6.5 PSIG 50 - 448 MBARG 0.05 - 0.50 KG/CM2	80%	-40 - 460°F. -40 - 240°C	Partial	•	Best	•	NFPA 68 ATEX / CE CIP / SIP
CV-S-I	Composite	0.5 - 14.5 PSIG 35 - 1000 MBARG 0.04 - 1.0 KG/CM2	80%	-40 - 1100°F. -40 - 600°C	Full	•	Better		NFPA 68
CV-CF	Composite	0.75 - 10.0 PSIG 52 - 690 MBARG 0.05 - 0.7 KG/CM2	60 - 75%	-40 - 250°F. -40 - 120°C	Partial	•	Better		NFPA 68 ATEX / CE
CV-SF	Composite	0.5 - 10.0 PSIG 35 - 690 MBARG 0.04 - 0.7 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C	Full	•	Good		NFPA 68
CV-H	Composite	0.5 - 10.0 PSIG 35 - 690 MBARG 0.04 - 0.7 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C		•	Good	•	NFPA 68
CV	Composite	0.5 - 10.0 PSIG 35 - 690 MBARG 0.04 - 0.7 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C	Partial	•	Good		NFPA 68 ATEX / CE
CV-I	Composite	0.5 - 10.0 PSIG 35 - 690 MBARG 0.04 - 0.7 KG/CM2	60 - 75%	-40 - 800°F. -40 - 425°C	Partial	•	Good		NFPA 68
Sani-V	Single Element Integrated Frame	0.5 - 6.5 PSIG 35 - 448 MBARG 0.04 - 0.5 KG/CM2	50%	-40 - 460°F. -40 - 240°C	Partial	•	Good	•	NFPA 68 ATEX / CE CIP / SIP
EleGuard	Single Element Integrated Frame	0.7 - 2.9 PSIG 50 - 200 MBARG 0.05 - 0.2 KG/CM2	25%	-4 - 140°F. -20 - 60°C		•	Good		NFPA 68 ATEX / CE
Flex-V	Rect,Reclosable	1.23 - 1.81 PSIG 85 - 125 MBARG 0.09 - 0.127 KG/CM2	50%	72°F. 22°C		•
CV-S	Composite	1.0 - 15.0 PSIG 69 - 1030 MBARG 0.07 - 1.0 KG/CM2	80 - 90%	-40 - 500°F. -40 - 260°C	Full	•*	Better		NFPA 68 ATEX /CE
CV-S-I	Composite	0.5 - 10.0 PSIG 35 - 690 MBARG 0.05 - 0.7 KG/CM2	80%	-40 - 1100°F. -40 - 600°C	Full		Good		NFPA 68 ATEX /CE
CV-CF	Composite	0.75 - 15.0 PSIG 35 - 1030 MBARG 0.05 - 1.0 KG/CM2	60 - 75%	-40 - 250°F. -40 - 120°C	Partial	•*	Best		NFPA 68
CV-SF	Composite	0.75 - 10.0 PSIG 35 - 690 MBARG 0.04 - 0.7 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C		•	Good		NFPA 68
CV-H	Composite	0.5 - 15.0 PSIG 35 - 1030 MBARG 0.04 - 1.0 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C			Good	•	NFPA 68
CV	Composite	0.5 - 15.0 PSIG 52 - 1030 MBARG 0.05 - 1.0 KG/CM2	60 - 75%	-40 - 500°F. -40 - 260°C	Partial	•*	Good		NFPA 68 ATEX / CE
CV-I	Composite	0.5 - 15 PSIG 35 - 1030 MBARG 0.4 - 1.0 KG/CM2	60 - 75%	-40 - 800°F. -40 - 425°C	Partial		Good		NFPA 68

* Non-fragmenting with addition of High Integrity upgrade.

LOCATIONS:

BELGIUM · BRAZIL · CANADA · FRANCE · GERMANY · INDIA · ITALY · JAPAN · MALAYSIA · SPAIN · UNITED KINGDOM · UNITED STATES